tinsel or streamers
Mod Podge
scissors and/or hole punch
clear iPhone cases

1. Assemble your glitter components. I used about a tablespoon-sized amount of glitter, tinsel and hand-cut streamers. To make the streamer parallelograms, I took a few strands and cut them long ways and then bunched them in a group and cut at an angle.
2. Working on one phone at a time (the glue dries really quickly), coat the inside of the case with a thin layer of Mod Podge. Distribute your glittery elements the way you’d like, dropping them from above or gently placing them with the tip of your finger. Try not to smudge or move the Mod Podge too much or you’ll leave a smear.
*If you want to just use small glitter, you can mix it into a small batch of Mod Podge and apply it directly in one step.
3. When your Mod Podge is totally dry, remove any excess glitter elements that didn’t full adhere, and either apply another coat and more glitter or move on to your paint.
*You can use a small Q-tip to remove excess glitter, paint or Mod Podge.
4. Apply a thin layer of paint (black was my favorite, because the glitter really stood out against it) and wait for it to fully dry. I did two thin coats on each phone.
5. Once the paint has fully dried (I let mine dry overnight), apply a final thin coat of Mod Podge to seal the paint. Attach to your phone, and you’re done!
You Should also see :

Tips Gardening Clairvo